Enjoy every tool and feature absolutely free during the early access period.

Set up O-GHEN Live

Every step, in order, with the screen you’ll be looking at. Stuck? Email us — a real person answers.

Prefer to watch? Each guide has its lesson from the course.The video course · 22 lessons

Guide 01

Output to a projector or second screen

One browser window, dragged to the other display.

  1. 1

    On the computer connected to the projector, sign in and open the panel.

  2. 2

    Click Outputs → Open Full window. A new window opens with the output in it.

  3. 3

    Drag that window onto the projector display and press F11 for full screen.

  4. 4

    Leave it there. Everything you send from the panel — from any device — appears on it.

  5. The dot beside each output turns green while that window is open and receiving, so you can tell from the panel whether the projector is still listening.

Outputs

Open Full windowOpen Lower window

Drag the window to the projector and press F11.

Live link

Org codePALACE

OBS · browser sources

  • Fulllive.o-ghen.com/out?mode=full&org=palace
  • Lower thirdlive.o-ghen.com/out?mode=lower&org=palace
  • Control docklive.o-ghen.com/panel

A green dot means that output is open somewhere and receiving.

Guide 02

Connect to OBS

Add the outputs as browser sources and the panel as a dock. Works offline once loaded.

  1. 1

    In OBS, add a Browser Source to your scene. Paste the Full output URL from Outputs, and set width 1920 and height 1080.

  2. 2

    Add a second Browser Source with the Lower-third URL, same size, above your camera. It’s transparent — only the caption bar shows.

  3. 3

    Leave “Shutdown source when not visible” and “Refresh browser when scene becomes active” unticked, so the sources keep their state between scenes.

  4. 4

    Optional: Docks → Custom Browser Docks → paste the Control dock URL to run the panel inside OBS.

  5. After the first load the sources keep working without internet. Sends travel between the panel and the sources inside the same computer.

Properties · Browser source

Shutdown source when not visible — leave this off

Refresh browser when scene becomes active — leave this off too

CancelOK

Guide 03

Download and import a Bible translation

KJV, WEB, BSB, ASV, YLT and Darby are built in. Any other translation comes in as an XML file.

  1. 1

    Find the translation as XML. eBible.org has hundreds, including Yoruba, Igbo and Hausa: open a translation, pick the “VPL” download and use the .xml inside. Check its licence first. Licensed translations (NIV, NKJV…) must be obtained from their publishers.

  2. 2

    In the panel, open the Bible tab, click the translation name to open the list, and choose Import a Bible (XML)… at the foot of it.

  3. 3

    Pick the file. You’ll see the detected format and the number of books and verses. Give it a name and a short code, e.g. WEB.

  4. 4

    Click Import. It’s selected straight away, and it’s in the list for everyone in your organisation — each computer saves its own copy the first time it opens it, so it works offline from then on.

  5. Importing needs the internet, and an organisation can keep up to five imported translations — the bin beside one in the list removes it for everyone. The six built-in Bibles are saved on every computer that opens the panel, so switching between them works offline. Supported layouts: Zefania, OpenSong, OSIS, eBible.org’s verse-per-line (VPL) XML and the common <bible><book><chapter><verse> format. If a file won’t import, send it to hello@o-ghen.com and we’ll add the format.

Import a translation

web-bible.xml
Format
Zefania XML
Books
66
Verses
31,102
Import

Guide 04

Build songs, slides and playlists

Lyrics split themselves into blocks, slides are laid out freely, and a playlist puts the session in order.

  1. 1

    Songs → New. Paste the lyrics in one go. A blank line starts a new block, and a first line like [Chorus] or “Verse 1:” names it instead of being sung.

  2. 2

    Coming from EasyWorship 6 or 7? Songs → Import, and choose both Songs.db and SongWords.db from C:\Users\Public\Documents\Softouch\EasyWorship\Default\v6.1\Databases\Data (close EasyWorship first). Your whole library comes across, verses and choruses intact.

  3. 3

    Slides → New for anything that isn’t a song or a verse: notices, a title card, a lower third. Drop in a coloured box, put text on it, drag it where you want — the background starts transparent, so a lower third is just a bar and a name.

  4. 4

    Playlists → New to set the order for a session: songs, slides and scripture references in the order you’ll need them, with the date on it.

  5. 5

    On the day, open the playlist and work down it. Anything in the library is still one search away if the service goes somewhere else.

  6. Themes decide how it all looks — fonts, colours, the box the text sits in — and a song or slide can override the theme for the Full output and the lower third separately.

What you type

[Verse 1]
Amazing grace, how sweet the sound
That saved a wretch like me

[Chorus]
Praise God, praise God
Praise God, praise God

What gets sent

  • Verse 1Amazing grace, how sweet…
  • ChorusPraise God, praise God

↑↓ steps between them. Each one goes up on its own.

Guide 05

Design a slide or a theme

A theme is the look every verse and song is sent in; a slide is laid out once by hand. Both are designed the same way.

  1. 1

    Theme → open one (or make a new one) for how scripture, songs, countdowns and name straps look. Slides → New for a one-off: a notice, a title card, a New Year greeting.

  2. 2

    Click the empty slide for its background: a colour or a gradient, a picture, or a looping video. With a picture or video, turn Opacity down to push it back behind the words — the colour under it shows through.

  3. 3

    Add Text, a shape, an icon or a picture from the toolbar and drag it where it goes. In a theme, set a text box’s Fills with to the verse, the reference or the lyrics, so each send fills it.

  4. 4

    Select the text. Under Effect, pick a look — Gold, Gradient, Glow, Neon, Outline or Raised — and its colour where it has one.

  5. 5

    Under Movement, pick Shine, Breathe, Sparkle or Words in to keep the words alive while they’re up. Under Animation, In and Out decide how each piece comes on and goes off.

  6. 6

    Movement stays still while you design. Press Play above the slide to see it as the room will, then Save.

  7. Effects and movement are drawn to play smoothly on the cheap TV sticks behind building screens. A phone set to reduce motion shows the words still.
Gold · Sparkle · Shine

Guide 06

Put a speaker’s name on the lower third

The name strap under whoever is speaking — typed once, a click every time after.

  1. 1

    In the panel, open Tools → Names.

  2. 2

    Type the name, and a title if you like (Senior Pastor, Choir Director). What they’re doing — Ministering, Preaching — is optional too.

  3. 3

    Click Show: the strap goes up on the lower third, over the camera in OBS. Turn on Full as well to put it on the projector too.

  4. 4

    Click the save button beside Show to keep the name in the list. Next time, click it there instead of typing.

  5. How the strap looks is a Names theme — Theme → make one, or change the built-in, the same way as any other design.

Apostle Abraham Ukuyoma

Palace Of Praise Ministries Inc.

OBS · transparent

Guide 07

Overlays: your logo, a Live tag, a ticker

Things that stay on screen over everything else — switched on and off from the panel, and left alone by Clear and Blank.

  1. 1

    Overlays → New overlay. It’s a see-through slide: put your logo in a corner, a “Live” tag, or a strip along the bottom.

  2. 2

    For a ticker, add Text and set Shows to Ticker. Type the notices one per item — the car with its lights on, the giving account — and choose whether they crawl along or come up one at a time.

  3. 3

    Choose where it shows: Full, Lower third, Phones, or any of them. Phones is off to start with, so a projector logo doesn’t land on everyone’s phone unasked.

  4. 4

    In the panel, Tools → Overlays: click one to put it up, again to take it down. Clear and Blank leave it there.

  5. 5

    Need to change a ticker mid-service? The pencil beside it in Tools → Overlays edits the words without leaving the panel; nothing reaches the screens until you save.

The LORD is my shepherd; I shall not want.

P
Welcome — we’re glad you’re hereGive: First Bank · 0123456789

Tools · Overlays

  • LogoFull · Lower
  • Notices tickerLower
  • Live tagLower

Guide 08

Play a video

A file from the desk computer, or a YouTube link — on the projector, and in OBS when the panel is its dock.

  1. 1

    In the panel, open Media → Videos. Add a video file (MP4 or WebM plays everywhere) or paste a YouTube link.

  2. 2

    A file stays on that computer — nothing is uploaded — so it plays with no internet. Add it on the computer the projector or OBS runs on. It stays there when you sign out, and other churches signing in on that computer don’t see it.

  3. 3

    Click it to put it up on Full. Pause, restart, mute and loop (for a background video) sit under the output cards.

  4. 4

    Sound comes from one output only, or the room hears it twice: the projector window, or OBS. Pick it under the controls. A projector window may ask for one click on it before it plays sound.

  5. 5

    For a moving background behind lyrics or scripture: open a theme (or a designed slide), click the empty slide, and pick Video. A short 1080p loop works best. Add the same file on every computer that runs a projector.

  6. Phones, the live link and TVs on other devices can’t play a file from the desk: they show a still and how far it has got. A YouTube video they can play — phones only when someone taps Watch here, since it uses their data. YouTube needs internet on every screen that plays it.

Media · Videos

  • Worship loop0:30 · this computerOn Full
  • Missions updateYouTube · online only

Pause · restart · sound · loop

Guide 09

Back up your library, or take it elsewhere

Everything you have made, as one file — and your songs in a format other software reads.

  1. 1

    Organisation → Backup → Download backup. Tick Pictures and Imported Bibles to have them inside the file too. Keep it somewhere safe; do it now and then.

  2. 2

    Songs for other software gives you every song as an OpenLyrics file in a .zip. OpenLP, FreeShow and others import them with their verses and choruses.

  3. 3

    To put a backup back: Choose a backup file, then Merge (adds what you don’t have, keeps what you do) or Replace (clears your library and puts the backup’s in).

  4. Replace downloads a backup of what you have first, so you can always go back. A restore that fails changes nothing at all.

Guide 10

Sermon notes on phones

Everyone who joined with your code can keep the service’s verses and slides.

  1. 1

    Nothing to set up: every verse and slide you send is kept for the service as it goes up.

  2. 2

    On the live page, people tap Notes to see them all — verses read one after another run together, like “John 3:16–18”. Joining late doesn’t matter; they get the whole service.

  3. 3

    At the end they can Copy all or Download the notes as a text file, headed with your church’s name and the date.

  4. Only what has been on screen is in the notes — never your library or what’s coming next. Notes older than 8 hours fall away, so each service starts clean. Songs aren’t included.

Guide 11

Giving details on everyone’s phone

Your account numbers on every phone that joined, with copy buttons — no mistyped digits.

  1. 1

    Organisation → Giving: add each account people give into — what it’s for, the bank, the number and the name — and a note if you like (“Use your name as the reference”). Save.

  2. 2

    At offering time, in the panel’s Giving card, tap Show on phones. Everyone who joined with your code sees the accounts, each with a Copy button.

  3. 3

    Want it on the screen as well? Tap On the projector — it goes up as a slide in your Slides theme.

  4. 4

    Tap Hide when you’re done. Blank and Clear leave it alone, so you can carry on with the service while people give.

  5. Display only — nothing is paid through O-GHEN. Someone who closes it on their phone can open it again from the Giving details button while it’s showing.

Guide 12

A stage display for the preacher

What is on screen, what comes next, the time and a sermon timer — on a screen facing the pulpit.

  1. 1

    On the desk computer: Outputs → Stage window, drag it to the monitor facing the pulpit, press F11.

  2. 2

    On a TV or tablet instead: open /stage on it, then in the panel Outputs → Add a screen and type the code shown. It is fed straight from the panel over the WiFi, so it keeps going if the internet drops.

  3. 3

    In the panel's Stage card, start the sermon timer when the preacher starts, and pick a length if you have one: it turns amber with five minutes left and red when over.

  4. 4

    To tell the preacher something, type it in Message to the pulpit (or tap one of the ready ones). It stays up until you clear it.

  5. The next slide appears by itself as you send — the next verse, the next part of the song or the next slide in a deck. The live link and phones never see it.

Guide 13

Count down to midnight on crossover night

A countdown that goes up by itself before midnight, then “Happy New Year” the moment it reaches zero.

  1. 1

    First make the slide for zero: Slides → New, type Happy New Year, and give it Gold with Sparkle (see Design a slide or a theme). Save it.

  2. 2

    In the panel, open Tools → Countdown and click Set….

  3. 3

    Choose Until a time and enter 00:00. Under Goes up, choose At a time — say 23:55 — so it starts by itself while you’re busy with the service. Give it a label, like Crossover.

  4. 4

    Turn on Put the countdown screen up, and pick a countdown theme if you’ve made one.

  5. 5

    Under At zero, choose Show a slide, then your deck and the Happy New Year slide. Click Schedule.

  6. 6

    That’s it. At 23:55 the countdown comes up on the screen, and at midnight the new year does — each screen keeps the time itself, so it happens even if the internet drops after you schedule it.

  7. The same works for any start time — Sunday’s 9:00 service, a conference session. For the last ten seconds to look different (big digits, a flash), design a countdown slide yourself: elements can be set to show only In the final seconds or After zero, and a slide can start the countdown itself when it’s sent.
10:42 AMSermon
24:59

NowPsalm 23:1

NextAmazing Grace

From the desk: “Five minutes, Pastor”

  • Name straps
  • Overlays
  • Countdowns
  • Stage display
  • Giving details
  • Sermon notes

Guide 14

Hotkeys and running it with two people

Keys for the operator at the desk, and a second pair of hands from anywhere in the room.

  1. 1

    Press / from anywhere to jump to quick send. Type a reference (“jn 3:16”) or the words you just heard, then Enter to send it.

  2. 2

    ↑ and ↓ step through the verses or song blocks in the reader; Enter sends the highlighted one. Shift+click sends a range of verses as one send.

  3. 3

    Esc blanks both outputs — the fastest way out of anything that shouldn’t be on the screen.

  4. 4

    For a second operator: Members → Invite, and they open the panel on their own phone or laptop. Both of you see the same “now showing”, and either can send.

  5. The panel is the same on a phone as on a laptop, so the second person doesn’t need to reach the desk to fix a typo or find a verse.

Keys

/Jump to quick send from anywhere
↑↓Step through verses or song blocks
EnterSend the highlighted one
ShiftEnterOpen it without sending
ShiftclickSend a range of verses
EscBlank both outputs

Guide 15

Put it on TVs around the building

Foyer, overflow, crèche — paired once, then fed straight from the desk over your own network.

  1. 1

    On the TV, open live.o-ghen.com/s. It asks to be paired.

  2. 2

    At the desk: Outputs → Screens → Add a screen. Read out the six characters.

  3. 3

    Type them on the TV with the remote and give the screen a name — Foyer, Overflow. It starts showing the output straight away, and remembers after that.

  4. 4

    The desk lists every screen with when it was last seen. Click a name to change it, or the cross to remove a TV that has left the building — it stops showing within seconds.

  5. A paired screen takes its sends directly from the panel across your network, so it updates faster than the projector URL, costs almost no data, and keeps working if the internet drops mid-service. It needs a panel open on the same network — with none open it falls back to the internet like any other output. Two things to know before a service: a TV switched on during an outage can't load the page at all, so turn your screens on while the internet is up; and if your WiFi has client isolation switched on (common on guest networks) devices can't reach each other, and the screens will quietly fall back to the internet instead.

Screens · 2 direct

On the TV, open live.o-ghen.com/s and type:

K4P7XM

Good for five minutes, once.

  • Foyer TVjust now
  • Overflow roomjust now

On YouTube

The O-GHEN Live Course

22 short lessons, from signing up to a service with no internet — about four minutes each.

Watch from the start

Ready? Create an organisation — free during early access.